Release update 2014-10-29

Last updated: Fri Nov 16 14:31:20 GMT 2018

October, October.  The leaves are turning color across the country, Halloween is approaching, and the Fall Classic is winding up, hopefully with our hometown Giants on top for the third time in just five years.  It's a good month.  Here at ThousandEyes, we've been hard at work and have some exciting updates to announce, particularly in the area of alerting.  Check the release notes below for details.

New Agent Locations

We've added a Cloud Agent in Dubai, United Emirates.  To request access to the Dubai agent, send us a note.
 

HTTP Server tests: Desired response code

HTTP Server tests now support setting a Desired Response code. Useful for service-targeted monitoring that doesn't return an HTTP/200 response (for example, targeting a site that requires client-side certificates), Administrators can change the desired response code from the default (2xx or 3xx responses) to a specific response code. This expected response code is used to determine the availability of an agent.

To set the desired response code, uncheck the Default (2xx or 3xx) option and set the response code, using Test Settings > Advanced Settings > HTTP Response section of the test settings interface. The desired response code must be a single response code; neither ranges nor wildcards are supported.

Screen_Shot_2014-10-28_at_11.52.19_AM.png

Note: this setting is independent of the Alert Settings option for specific response.  The default alerting condition for HTTP Server tests "ERROR is ANY" will respect the Desired Status Code entered here.
 

Alerting changes

This is the first of two releases covering significant changes in our alerting. Based on feedback from our customers (remember, you can make use of the "Make a Wish" at the bottom of each page in the platform to request), we have added the following new features:

Consecutive Rounds before Trigger

Our alerting has long supported the concept of consecutive alerts before notification. In this release we've changed the behavior of this option, and moved it from the notification rule logic into the alert triggering logic.  This change was made to reduce alerting noise in the system, and make alert notifications.

Now, you can set the number of locations, and the number of times they must meet this criteria before the alert is triggered in the alert settings page.

Screen_Shot_2014-10-28_at_11.59.45_AM.png

For accounts who were using the Consecutive Violations before Notification setting (which has been removed in light of this new option), we have moved the value used in notification into the alert rule triggering criteria.  

PagerDuty Integration

We've introduced the ability to use PagerDuty to handle notification and escalation of your alerts generated by ThousandEyes.  From PagerDuty's website: "PagerDuty is an alerting system for IT professionals. PagerDuty connects with a variety of systems (including monitoring tools and ticketing systems) and dispatches alerts via automated phone call, SMS and email."

Alert rules can be configured to notify a PagerDuty Service, via the Settings > Alerts > Notifications tab. This article outlines configuring PagerDuty to receive alerts from ThousandEyes.
 

Path Visualization - interface type detection

Based on the reverse DNS name of layer 3 devices found in the path between agents and test targets, we now show the Interface type and Vendor (if available) of devices transited during Path Trace attempts.  This is shown when hovering over a node in the Path Visualization view, for a device matching patterns determined by our development efforts.

VendorInterface Type
Cisco IOS10 Gigabit Ethernet
Cisco IOSEthernet Bundle
Cisco IOSGigabit Ethernet 
Cisco IOS XR10 Gigabit Ethernet 
Cisco IOS XRSONET 
Juniper10 Gigabit Ethernet 
JuniperEthernet Bundle 
JuniperFast Ethernet 
JuniperGigabit Ethernet 
JuniperSONET 
JuniperT3 
JuniperTunnel 
n/a10 Gigabit Ethernet
n/a100 Gigabit Ethernet 
n/aEthernet 
n/aEthernet Bundle 
n/aGigabit Ethernet 
n/aSONET 
n/aSONET Bundle 
n/aVlan 

 Screen_Shot_2014-10-28_at_6.06.35_PM.png

API

We've added the roundsBeforeTrigger field (introduced in today's release) to the alert-rules endpoint for APIv4 and higher, as well as corrected an issue with retrieval of Saved Event data for Page Load Tests.  Check our Developer Reference site for more information.
 

We love hearing from our customers

As always, send us a note if you have a question, a comment, or just want to say hi.